WE WRITE CUSTOM ACADEMIC PAPERS

100% Original, Plagiarism Free, Tailored to your instructions

Order Now!

EAT216 FEA Assignment 2014-2015 Page 1 of 3;Dave Knapton EAT216 – COMPUTER AIDED ENGINEERING/FINITE ELEMENTS ANALYSIS ASSIGNMENT BRACKET RE-DESIGN REPORT

EAT216 FEA Assignment 2014-2015 Page 1 of 3;Dave Knapton EAT216 – COMPUTER AIDED ENGINEERING/FINITE ELEMENTS ANALYSIS ASSIGNMENT
BRACKET RE-DESIGN REPORT
1. INTRODUCTION
Finite Element Analysis (FEA) is a valuable design tool which can be utilized to offer a simulated predication of how complex 3D geometry will perform under certain loading conditions. Design software such as Solidworks can make the task relatively simple but the information given to the software and interpretation of the results requires significant understanding of the application. It is for this reason that a detailed report should accompany such analysis to convey the rationale for the study.
2. ANALYSIS AND DESIGN REPORT
2.1 The Task
Part A
You are to use Solidworks Simulation Xpress Analysis Wizard to analyse the geometry of the bracket as detailed in fig 1. Please pay careful attention not only to the geometry of the bracket but also the installation and loading condition. Please note, you may model this geometry from scratch using the drawing or alternatively use the Solidworks part file downloadable from Sunspace.
You will be awarded marks for Part A as follows:
Appropriate fixtures applied to the model to replicate real life application. 5 marks
Appropriate loads applied to the model to replicate real life application. 5 marks
Application of correct material. 5 marks
A written description to explain the reason for adding the fixtures and loads in the way you did.
15 marks
A written commentary to conclude the results, this should include as a minimum, reporting of the maximum stress and displacement experienced by the component and some analysis of the results with respect to the material yield strength should also be included. 10 marks
Part B
Once this initial analysis is complete, you are to use the results to inform a redesigned bracket and validate this with FEA. The technical performance of the bracket should be the focus of the re-design and thus you do not need to worry too much about other factors such as the manufacturability. A suitable starting target for the re-design should be that you are aiming to reduce the weight of the bracket by 10% minimum, without increasing the maximum deflection by more than 10%. You should not be constrained by these targets however, you may find these easy to exceed or you may find them extremely challenging, the result itself is not such a concern but your documented approach and clear reporting of the findings are of importance. Optimise the bracket to the best of your ability.
The constraints of the redesign are:
1) All fixing points of the bracket must remain the same, size and position.
2) The load bearing face must undergo no modification I terms of size or position.
3) The load itself must be the same size and direction.
The variables you are permitted to change are:
1) The geometry of the bracket.
2) The material of the bracket.
EAT216 FEA Assignment 2014-2015 Page 2 of 3
Dave Knapton
Marks for Part B will be awarded as follows:
Rationale for improvements based on analysis from the initial bracket. 20 marks
Documentation to show that comparable testing has occurred. 10 marks
A conclusion which reports the analysis results of the re-designed bracket compares the results with original. This should include as a minimum, reporting of the maximum stress and displacement experienced by the component. Some analysis of the results with respect to the material yield strength should also be included. 20marks
Accurate documentation of the design changes made. 10 marks
It is noted that Solidworks Simulation Express has a built in reporting feature. A computer generated report is not suitable for this assignment however, please write your own discussion of your process and include screen grabs where appropriate. Also you must rely on your own engineering knowledge to optimise the model and not use any automated software features.
If you adopt an iterative approach and wish to include data from incremental steps, please include these in appendices.
2.2 Report Requirements
Your submission should take the form of a report, not exceeding 8 pages (plus appendices if necessary), and address the items in the above marking scheme.
2.3 Submission Date Your report submission is to be uploaded to the relevant Dropbox on Sunspace by 23/04/15.
EAT216 FEA Assignment 2014-2015 Page 3 of 3
Dave Knapton
Figure 1 – The geometry, installation and loading condition of original bracket.
.
use no more then 10 Stocks

Our Service Charter

  1. Excellent Quality / 100% Plagiarism-Free

    We employ a number of measures to ensure top quality essays. The papers go through a system of quality control prior to delivery. We run plagiarism checks on each paper to ensure that they will be 100% plagiarism-free. So, only clean copies hit customers’ emails. We also never resell the papers completed by our writers. So, once it is checked using a plagiarism checker, the paper will be unique. Speaking of the academic writing standards, we will stick to the assignment brief given by the customer and assign the perfect writer. By saying “the perfect writer” we mean the one having an academic degree in the customer’s study field and positive feedback from other customers.
  2. Free Revisions

    We keep the quality bar of all papers high. But in case you need some extra brilliance to the paper, here’s what to do. First of all, you can choose a top writer. It means that we will assign an expert with a degree in your subject. And secondly, you can rely on our editing services. Our editors will revise your papers, checking whether or not they comply with high standards of academic writing. In addition, editing entails adjusting content if it’s off the topic, adding more sources, refining the language style, and making sure the referencing style is followed.
  3. Confidentiality / 100% No Disclosure

    We make sure that clients’ personal data remains confidential and is not exploited for any purposes beyond those related to our services. We only ask you to provide us with the information that is required to produce the paper according to your writing needs. Please note that the payment info is protected as well. Feel free to refer to the support team for more information about our payment methods. The fact that you used our service is kept secret due to the advanced security standards. So, you can be sure that no one will find out that you got a paper from our writing service.
  4. Money Back Guarantee

    If the writer doesn’t address all the questions on your assignment brief or the delivered paper appears to be off the topic, you can ask for a refund. Or, if it is applicable, you can opt in for free revision within 14-30 days, depending on your paper’s length. The revision or refund request should be sent within 14 days after delivery. The customer gets 100% money-back in case they haven't downloaded the paper. All approved refunds will be returned to the customer’s credit card or Bonus Balance in a form of store credit. Take a note that we will send an extra compensation if the customers goes with a store credit.
  5. 24/7 Customer Support

    We have a support team working 24/7 ready to give your issue concerning the order their immediate attention. If you have any questions about the ordering process, communication with the writer, payment options, feel free to join live chat. Be sure to get a fast response. They can also give you the exact price quote, taking into account the timing, desired academic level of the paper, and the number of pages.

Excellent Quality
Zero Plagiarism
Expert Writers

Instant Quote

Subject:
Type:
Pages/Words:
Single spaced
approx 275 words per page
Urgency (Less urgent, less costly):
Level:
Currency:
Total Cost: NaN

Get 10% Off on your 1st order!